Usage of on-board power converter.
2022-11-03
1. Insert the vehicle inverter into the cigarette lighter socket, and check the tightness between the plug and the socket. If it is too loose, open the shrapnel on both sides of the plug head and insert it into the cigarette lighter socket.
2. Please confirm whether the power indicator of the on-board inverter is on
3. Insert the power plug of the electrical appliance to be used into the socket of the on-board power converter
4. Fuse replacement: unscrew the plug part of the plug counterclockwise and replace it with a new fuse
Special tips:
When unplugging the electrical plug in continuous use, make sure that the switch of the electrical appliance is turned to "OFF", and then unplug the power plug. And unplug the on-board inverter.
When replacing the fuse of the on-board inverter, be sure to use the fuse of the same model and specification. Using a fuse or wire other than the specified specification will cause abnormal overheating and fire.
Please clean the dirt at the plug of the vehicle inverter in time to avoid poor contact or abnormal overheating of the converter
After use or when the vehicle inverter is not used, please unplug the product from the cigarette lighter socket and keep it properly. Please use it strictly. Top my conversation for quick saving and searching
