Safe operation specification for CNC machining
2021-11-09
When operating a machining center, it is necessary to understand the safe operation specifications of the CNC Machining center in advance. This is not only a need to ensure the safety of personnel and equipment, but also a need to ensure that CNC machining can work normally, achieve technical performance, and give full play to its processing advantages. So what is the safe operation specification process of CNC machining? 1. Before booting (1) Wear labor protection supplies and do not wear gloves to operate the machine tool; (2) Read the operating instructions of the machine tool in detail, and safety accidents before being familiar with the operation of the machine tool; (3) The operator must be familiar with the function of each button and operation precautions; (4) Pay attention to the warnings on the warning signs of various parts of the machine tool; (5) Install lubricating oil and hydraulic oil in accordance with the requirements of the machine tool manual; (6) The tools around the machine tool should be placed neatly, so that they can be easily placed; (7) The protective door of the machine tool must be closed before adding. 2. At work (1) Civilized production, concentrated energy, and put an end to abuse and fatigue operations; bantering, chatting, sleeping and leaving the post arbitrarily; (2) When the machine tool is in the state of temperature and electricity, the operator should never open or touch the part of the machine tool marked with a lightning standby sign and equipped with a strong electric device to prevent electric shock; (3) Pay attention to check whether the workpiece and the tool are clamped correctly and reliably: After the tool is clamped, the manual mode should be used for trial cutting; (4) Do not remove chips during the operation of the machine tool, and avoid touching the machine and moving parts of the machine with your hands; (5) When removing chips, certain tools should be used, and attention should be paid to the wood being scratched by chips; (6) When measuring the workpiece, it must be carried out when the machine tool is stopped; (7) Do not start the machine when thundering. Because the instantaneous high voltage and high current during lightning strikes can easily impact the machine tool, damage the module or lose the changed data, causing unnecessary losses. Three, after completion (1) Fill in the shift record truthfully, and report any problems in time. (2) Clean the work site and wipe clean the machine tool, and pay attention to keeping the machine tool and control equipment clean. (3) Cut off the power of the system and leave after closing the doors and windows. The safe operation procedure of CNC machining is shared here for everyone. Following the safe operation procedure of CNC machining is not only to ensure the safety of personnel and equipment, but also to ensure that CNC machining can work normally, achieve technical performance, and give full play to its processing advantages. Needs.
